Filament Spectrum PLA Pro was manufactured using raw materials developed for 3D printing.
PLA Pro combines two desired features: ease of printing as with normal PLA material while maintaining properties comparable to ABS. Filament Spectrum PLA Pro, after printing, exhibits almost 50% higher impact strength than ABS material. Therefore, when printing from Spectrum PLA Pro, we avoid any difficulties such as: shrinkage or unpleasant odors occurring when printing with ABS.
PLA Pro material is also characterized by an increased flow index.
PLA Pro advantages:
- a good alternative to styrene-based materials
- printing possible without hot pad
- easy separation of the object from the table
- high strenghtness comparable to ABS
- no shrinkage after cooling
- not flammable
- ideal side surface of printouts
Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.
diam. outside – 20cm, diam. inside. - 5.2cm, width - 7.8cm
Physical & termal properties of basic material
|MFR (210°C / 2.16kg), g/10 min:|
|Heat Distortion Temperature:|